Sealband Selection

Sealing principle with different bands

17.10.2006
Flatband The common Flatband is an old stand-by configuration that was originally developed to make seals with widths wider than that which could be made with round wire. In most applications...

   

Sealbands selection

17.10.2006
Select the proper heatseal band for the job Selection of the best heatseal band for any given application involves several considerations. The band must be of the correct width and configuration...

    

Jaw-end kits

16.10.2006
Heatseal bands expand when they are heated. Therefore, a means must be provided to take up the slack or the heatseal band will buckle and break prematurely. The heatseal band is also an ...

     

Jaws Design

16.10.2006
HOW DO I MAKE A FUNCTIONING HEATSEAL JAW? Heatseal jaw design is relatively simple. It is made even easier by the use of Jørgen Bork Electronic ApS components that are available to ...

    

Constant sealing

16.10.2006
The START signal is turned on for the duration of the machine use, and the heatseal element is constantly monitored and maintained at the pre-set temperature. During the sealing phases, the controll ...

  

Impulsesealing

16.10.2006
The Impulse sealing method occurs when the start signal is synchronized with the machine rhythm, every heatsealing cycle is followed by a cooling phase with jaws closed. Cooling is effected with jaw ...

   

Where or why resistron

26.09.2006
- Heatseal Bands - Cutting Wires - Beaded Bands - Contoured Bands - Vertical Heatseal Tools - Contoured Sealing/ Cutting Tool - Hot ...

  

Sealing principle resistron

26.09.2006
...

   

Sealing principle resistron

26.09.2006
How does the RESISTRON Temperature Controller work? The RESISTRON controller constantly monitors the actual temperature of the heatseal element by measuring the change in resistance of the heatsea ...

Contact us

Name  *
Address 
Zip code and City 
Phone number 
E-mail  *
Comments  *
 
Jørgen Bork Electronic ApS | © Copyright 2012 I Åvej 30A, 3500 Værløse I 44 48 88 80 I info@borkelectronic.dk